LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> Kizashi Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 94 (Wiring Systems) >> General Description >> How to Read Connector Layout Diagram
April 5, 2026: LEMON Manuals is launched! Read the announcement.

How to Read Connector Layout Diagram

WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.

[A-1]: Harness Symbol and Corresponding Harness Name 

  1. A: Battery cable
  2. B: A/C harness
  3. C: Engine harness
  4. D: Injector harness, Oil pressure switch wire
  5. E: Main harness, Power steering wire
  6. F: Console wire
  7. G: Instrument panel harness, Instrument panel antenna wire
  8. J: Side door wire (including P/W related wires)
  9. K: Interior light harness, Roof wire, Roof radio antenna wire, Rear speaker wire
  10. L: Floor harness, Floor antenna wire, Coupling harness, Accessory socket wire, G sensor wire
  11. M: Rear bumper wire
  12. O: Rear end area harness/wires (except Rear bumper wire)
  13. Q: Curtain air bag wire, Side air bag harness, Pretensioner wire
  14. R: Fuel pump wire
  15. S: Contact coil

[A-2]: Connector Number 

[B]: Ground Point No. 

Fig 1: Connector Layout Diagram
G06527049Courtesy of SUZUKI OF AMERICA CORP.