Steering Angle Sensor Removal and Installation: Removal
WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
When removing the steering angle sensor, make sure of the following to avoid malfunction of steering angle sensor.
- Park vehicle on level site and apply parking brake, stop engine with ignition mode in "ON", and set steering wheel in straight-ahead position.
- Fix the steering angle sensor so that it does not rotate.
- Remove steering wheel, see Steering Wheel Removal and Installation .
- Remove lighting switch and wiper & washer switch.
- Remove screws and claws and remove whole unit of steering angle sensor from steering column, see STEERING WHEEL AND COLUMN COMPONENTS .
- Perform contact coil centering, see CENTERING OF CONTACT COIL CABLE ASSEMBLY .
- Remove screws (1) and steering angle sensor (2) from contact coil cable assembly bracket (3).