LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> Kizashi Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 90 (Power Assisted Steering System) >> Repair Instructions >> Rack Boot Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Rack Boot Removal and Installation: Removal

WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove front suspension frame, see FRONT SUSPENSION FRAME REMOVAL AND INSTALLATION .
  2. Remove steering gear case, see Steering Gear Case Assembly Removal and Installation .
  3. Remove tie-rod end, see Tie-Rod End Removal and Installation .
  4. Remove boot clamp (1) and boot band (2) and remove rack boot (3) from steering gear case (4).
    Fig 1: Identifying Boot Clamp, Boot Band, Rack Boot And Steering Gear Case
    G06528959Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals