LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> Kizashi Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 90 (Power Assisted Steering System) >> Diagnostic Information and Procedures >> P/S Warning Light Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

P/S Warning Light Check

WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.
  1. Push engine switch to change ignition mode of keyless push start system to "ON" (without engine running) and check if "P/S" warning light (1) comes on. If the light does not come on, go to P/S WARNING LIGHT DOES NOT COME ON WITH IGNITION MODE CHANGE TO "ON" before Engine Starts  of the diagnostic flows.
  2. Start engine and check if "P/S" warning light turns OFF. If light remains ON and no DTC is detected, go to P/S Warning Light Remains ON Steady after Engine Starts  for troubleshooting.
    Fig 1: Identifying P/S Warning Light
    G06528923Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals