LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> Kizashi Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 90 (Power Assisted Steering System) >> Diagnostic Information and Procedures >> DTC Clearance
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Clearance

WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.
  1. Confirm that ignition mode of keyless push start system is in "OFF".
  2. Connect SUZUKI scan tool to DLC (1) located around bottom at driver's seat side.

    Special Tool 

    1. SUZUKI scan tool (SUZUKI-SDT) 
    Fig 1: Connecting Scan Tool To DLC
    G06528925Courtesy of SUZUKI OF AMERICA CORP.
  3. Push engine switch to change ignition mode of keyless push start system to "ON".
  4. Clear DTC according to instructions displayed on SUZUKI scan tool. For further details, refer to operator's manual for SUZUKI scan tool.
  5. Push engine switch to change ignition mode of keyless push start system to "OFF" and disconnect SUZUKI scan tool from DLC after completing clearance.
scientia non olet · About LEMON Manuals