LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> Kizashi Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 90 (Power Assisted Steering System) >> Diagnostic Information and Procedures >> DTC C1164: CAN Invalid Data from BCM >> DTC Troubleshooting
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Troubleshooting

WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.
DIAGNOSTIC PROCEDURE CHART

Step Action YES NO
1  Was "EPS System Check" performed?  Go to Step 2. Go to EPS System Check.
2  DTC check 
  1. Check DTC.

Is there DTC(s) other than C1164? 		 Go to troubleshooting for applicable DTC(s). Go to Step 3.
3  BCM check 
  1. Check BCM.

Is it in good condition? 		 Substitute a known-good P/S control module and recheck DTC, see P/S Control Module Removal and Installation . Substitute a known-good BCM and recheck DTC, see BCM REMOVAL AND INSTALLATION .
scientia non olet · About LEMON Manuals