LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> Kizashi Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 89 (Continuously Variable Transaxle (CVT)) >> Repair Instructions >> Select Lever Assembly Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Select Lever Assembly Removal and Installation: Removal

WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative (-) cable at battery.
  2. Remove console box, see Inspection of TCM and Its Circuits .
  3. Disconnect adjuster case (select cable end) from select lever assembly.
  4. Disconnect select lever connector.
  5. Remove select lever nuts and detach select lever assembly from floor panel.
scientia non olet · About LEMON Manuals