LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> Kizashi Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 89 (Continuously Variable Transaxle (CVT)) >> Repair Instructions >> Primary Pulley Speed Sensor Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Primary Pulley Speed Sensor Removal and Installation: Removal

WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative (-) cable at battery.
  2. Remove air cleaner inlet hose, see AIR CLEANER ASSEMBLY REMOVAL AND INSTALLATION .
  3. Disconnect connector (1) from primary pulley speed sensor.
  4. Remove primary pulley speed sensor (3) from transaxle by removing primary pulley speed sensor bolt (2).
scientia non olet · About LEMON Manuals