CVT Fluid Cooler Hoses Replacement

WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.

Rubber hoses for CVT fluid cooler should be checked at specified interval. If replacing them, be sure to note the following points.

Remove front bumper, if necessary.
Replace clamps with new ones at the same time.
Clamp new clamps securely.

Fig 1: Identifying CVT Fluid Cooler Hoses
Courtesy of SUZUKI OF AMERICA CORP.

Fig 2: Identifying CVT Fluid Cooler Hoses Location
Courtesy of SUZUKI OF AMERICA CORP.