Monitoring Procedure
WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.
Input signal of the following are checked for circuit strategy rationality by monitoring each sensor, actuator and vehicle condition.
- TCM (P062F)
- Brake switch (P0703)
- Transmission range sensor (P0705)
- Transmission fluid temperature sensor (P0711)
- Primary pulley speed sensor (P0716, P0717)
- Secondary pulley speed sensor (P0721, P0722)
- TCC solenoid valve (P0741)
- Secondary pressure control solenoid valve (P0776, P0777)
- Primary pressure sensor/secondary pressure sensor (P0871)
- Line pressure control solenoid valve (P0961)
- Lock-up/select switching solenoid valve (P1810)
- Stepper motor (P1816, P1818)
- CAN communication (U0073, U0100)