LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> Kizashi Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 89 (Continuously Variable Transaxle (CVT)) >> Diagnostic Information and Procedures >> DTC P0826: Manual Mode Control Switch Circuit >> DTC Detecting Condition and Trouble Area
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Detecting Condition and Trouble Area

WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.
DTC DETECTING CONDITION CHART

DTC detecting condition Trouble area
DTC P0826: Manual Mode Control Switch Circuit 
This DTC is detected if any one of the following conditions is met.
  • Manual mode switch ON signal continues to be input for longer than 5 sec. even after "P", "R" or "N" range signal input.
  • ON signal of manual shift-down switch or manual shift-up switch is input for longer than 5 sec. even while manual mode switch is OFF.

(1 D/C detection logic but MIL does not light up)
  • Manual mode shift switch (include manual mode switch, manual shift-up switch and manual shift-down switch) and/or its circuit
  • TCM