LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> Kizashi Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 87 (Manual Transmission/Transaxle) >> Repair Instructions >> Manual Transaxle Oil Level Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Manual Transaxle Oil Level Check

WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.
  1. Hoist vehicle horizontally.
  2. Remove left side engine undercover.
  3. Remove transaxle oil level/filler plug (1) and gasket, and confirm oil flow from oil level/filler plug hole (2). If oil does not flow, pour specified oil until a little oil flows from oil level/filler plug hole.
  4. Install transaxle oil level/filler plug with new gasket, and then tighten it to specified torque.

    Tightening torque 

    Transaxle oil level/filler plug (a): 27 N.m (2.8 kg-m, 20.0 lbf-ft) 

    Fig 1: Identifying Manual Transaxle Oil Level And Filler Plug
    G06528760Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals