April 5, 2026: LEMON Manuals is launched! Read the announcement.

Gear Shift and Select Shaft Assembly Disassembly and Reassembly

WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.

Reference: MANUAL TRANSAXLE UNIT DISMOUNTING AND REMOUNTING

Reference: GEAR SHIFT AND SELECT SHAFT ASSEMBLY REMOVAL AND INSTALLATION

Reference: GEAR SHIFT AND SELECT SHAFT ASSEMBLY COMPONENTS

Push spring pins out using special tool as shown in figure.
Special Tool
1. 09925-78210 6.0 mm
Inspect component parts for wear, distortion or damage. If any defect is found, replace defective part with new one.
NOTE: When driving in spring pins, prevent shaft from being bent by supporting it with wood block.

Fig 1: Identifying Gear Shift And Select Shaft Assembly Components
Courtesy of SUZUKI OF AMERICA CORP.