LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> Kizashi Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 83 (Tire Pressure Monitoring System) >> Repair Instructions >> How to Identify Tire Pressure Sensor Number >> Not Using Recommended Tool
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Not Using Recommended Tool

WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check each tire for crack, any other damage and air leakage.
  2. Adjust each tire pressure to 260 kPa.
  3. Replace right front tire with spare tire.
  4. Drive vehicle at more than 35 km/h (22 mph) for 10 minutes.
  5. Check DTC, see DTC CHECK .
  6. Using the indicated DTC and referring to DTC TABLE , check the number of tire pressure sensor. The number indicated by DTC represents the number of tire pressure sensor of right front tire.
  7. Adjust right front tire pressure to 260 kPa.
  8. Clear DTC, see DTC CHECK .
  9. Confirm the number of tire pressure sensor for other tires by same procedure.
scientia non olet · About LEMON Manuals