LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> Kizashi Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Rear Suspension & Wheel Alignment) >> Repair Instructions >> Shock Absorber Disassembly and Reassembly >> Disassembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Shock Absorber Disassembly and Reassembly: Disassembly

WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove rear shock absorber support cap bolt (2) and remove rear shock absorber support (3).
  2. Remove rear shock absorber nut (1) while holding piston rod of rear shock absorber by the flat portion at its tip.
Fig 1: Removing Rear Shock Absorber Support Cap Bolt And Rear Shock Absorber Support
G06528354Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals