Tightening Torque Specifications
WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
For fastener with * (asterisk) below, be sure to tighten it according to specified procedure in "Repair Instructions".
TORQUE SPECIFICATION
| Fastening part | Tightening torque | ||
|---|---|---|---|
| N.m | kgf-m | lbf-ft | |
| Exhaust manifold bolt* | 50 | 5.1 | 37.0 |
| Exhaust manifold nut* | 50 | 5.1 | 37.0 |
| Exhaust pipe No. 1 bolt | 50 | 5.1 | 37.0 |
| Exhaust manifold stiffener bolt* | 50 | 5.1 | 37.0 |
NOTE:
The specified tightening torque is described in the following.
EXHAUST SYSTEM COMPONENTS
EXHAUST SYSTEM COMPONENTS
Reference:
For the tightening torque of fastener not specified in this section, refer to FASTENERS INFORMATION .