LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> Kizashi Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 80 (Charging System) >> Repair Instructions >> Generator Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Generator Removal and Installation: Removal

WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative (-) cable from battery.
  2. Remove engine cover.
  3. Remove accessory drive belt, see Accessory Drive Belt Removal and Installation .
  4. Disconnect "B" terminal wire (1) and connector (2) from generator (3).
  5. Remove generator (3).
    Fig 1: Identifying Generator, B Terminal Wire And Connector
    G06528311Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals