LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> Kizashi Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 80 (Charging System) >> Repair Instructions >> Battery Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Battery Removal and Installation: Removal

WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative (-) cable (1) at battery (4).
  2. Disconnect positive (+) cable (2) at battery.
  3. Remove retainer (3).
  4. Remove battery.
    Fig 1: Identifying Battery And Retainer
    G06528305Courtesy of SUZUKI OF AMERICA CORP.
  5. Remove battery tray (1).
  6. Remove battery bracket (2) by removing air cleaner assembly, see AIR CLEANER FILTER REMOVAL AND INSTALLATION and ECM, see ECM REMOVAL AND INSTALLATION if necessary.
    Fig 2: Identifying Battery Tray And Battery Bracket
    G06528306Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals