Oil Pump Assembly Disassembly and Reassembly: Disassembly

WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.

Remove oil pump sprocket referring to step 3) in "Removal" under Balancer Shaft Removal and Installation .
Loosen oil pump cover bolts (2) and remove oil pump cover (1).

Fig 1: Identifying Oil Pump Cover Bolts
Courtesy of SUZUKI OF AMERICA CORP.
Remove outer rotor (1) and inner rotor (2).
CAUTION: The outer rotor must be installed facing the same direction which it was when it was removed, so confirm the direction the matchmark (3) is facing.

Fig 2: Identifying Outer Rotor And Inner Rotor
Courtesy of SUZUKI OF AMERICA CORP.
Remove relief valve (1) and spring (2) by removing retainer (3) from oil pump cover (4).

Fig 3: Identifying Relief Valve, Spring, Retainer And Oil Pump Cover
Courtesy of SUZUKI OF AMERICA CORP.