Desiccant Removal and Installation: Installation

WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.

Reverse removal procedure noting the following points.

Do not take out desiccant from plastic bag until just before inserting it into receiver.
Install new desiccant, new O-ring and new filter cap.
Apply specified compressor oil to O-ring.
: Compressor oil 99000-99022-00E (Compressor oil (DH-PS, 250cc))
Evacuate and charge A/C system referring to "EVACUATION " and "CHARGE " in Operation Procedure for Refrigerant Charge .