Using SUZUKI Scan Tool
WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.
- Connect manifold gauge set to charging valves.
Special Tool
: 09990-06020
- Connect scan tool to DLC and display "Refrigerant Pressure" in "Data list" mode on SUZUKI scan tool.
- When A/C switch is at OFF, compare pressure [B] of high pressure gauge and pressure [A] displayed on SUZUKI scan tool.
- Start engine and operate A/C system.
- Check that the relation between pressure [B] and pressure [A] shows such characteristic as shown.
If check result is not satisfactory, replace A/C refrigerant pressure sensor.