LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> Kizashi Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 74 (Communication System) >> Diagnostic Information and Procedures >> Troubleshooting for Communication Bus Off >> Communication Check >> SDM
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Communication Check: SDM

WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.
  1. Push engine switch to change ignition mode to "OFF".
  2. Connect "G11" connector to SDM.
  3. Push engine switch to change ignition mode to "ON".
  4. Select "Communication Bus Check" under "Bus Check" menu of SUZUKI scan tool.
  5. Confirm the CAN communication that control modules, sensors and SDM have been already connected on is in normal condition, see TCM (CVT model) .
  6. If any malfunction is found, substitute a known-good SDM and recheck DTC, see SDM REMOVAL AND INSTALLATION .
scientia non olet · About LEMON Manuals