Rain/light sensor
WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.
- Push engine switch to change ignition mode to "OFF".
- Connect connector to rain/light sensor.
- Push engine switch to change ignition mode to "ON".
- Select "Communication Bus Check" under "Bus Check" menu of SUZUKI scan tool.
- Confirm the CAN communication that control modules, sensor and rain/light sensor have been already connected on is in normal condition, see TCM (CVT model) .
- If any malfunction is found, substitute a known-good rain/light sensor and recheck DTC, see RAIN/LIGHT SENSOR REMOVAL AND INSTALLATION (IF EQUIPPED) .