DTC Confirmation Procedure
WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Prepare all registered remote controllers before performing DTC confirmation procedure.
- Push engine switch to change ignition mode to "ON".
- Confirm that "Remote Controller Battery Warning" setting is "Active" mode.
- Place remote controller within the keyless engine start operation area and open and close door more than 2 times.
- Repeat Step 3) 6 times.
- Perform Step 3) and 4) with all of registered remote controllers.