Enabled conditions
WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.
ENABLED CONDITIONS CHART
| Parameter | Min. | Max. |
|---|---|---|
| P0441 | ||
| Purge accumulation | 70 sec. | - |
| Purge learn value for 60 sec. | - | 0.05 |
| Purge flow rate (target) | 0.73 g/sec. | - |
| EVAP vent valve | No DTC (P0449) | |
| EVAP leak check pressure sensor | No DTC (P2228, P2229) | |
| EVAP canister purge valve | No DTC (P0443) | |
| P0456, P2404 | ||
| Duration time from engine off | 5 hours | - |
| EVAP leak check pressure sensor | No DTC (P2228, P2229) | |
| EVAP vent valve | No DTC (P0449) | |
| EVAP leak detection pump | No DTC (P2400) | |
| EVAP canister purge valve | No DTC (P0443) | |
| IAT | 4.4 °C (39.9 °F) | 35 °C (95 °F) |
| ECT | 4.4 °C (39.9 °F) | 35 °C (95 °F) |
| Battery voltage | 11 V | - |
| Ignition mode | OFF | |
| Fuel level | - | 85% |
| Barometric pressure | 75 kPa | - |