Tightening Torque Specifications
WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS
| Fastening part | Tightening torque | ||
|---|---|---|---|
| N.m | kgf-m | lbf-ft | |
| Strut bracket nut | 120 | 12.2 | 88.5 |
| Brake hose bolt | 26 | 2.7 | 19.5 |
| Stabilizer bar joint nut | 55 | 5.6 | 40.5 |
| Strut support nut | 50 | 5.1 | 37.0 |
| Strut support rod nut | 73 | 7.4 | 54.0 |
| Suspension arm joint nut | 55 | 5.6 | 40.5 |
| Suspension arm bolt | 93 | 9.5 | 68.5 |
| Suspension arm nut | 93 | 9.5 | 68.5 |
| Front suspension frame mounting bracket bolt | 90 | 9.2 | 66.5 |
| Front suspension frame No. 1 bolt | 120 | 12.2 | 88.5 |
| Front suspension frame No. 2 bolt | 120 | 12.2 | 88.5 |
| Front suspension mounting nut | 55 | 5.6 | 40.5 |
| Engine front mounting nut | 55 | 5.6 | 40.5 |
| Engine rear mounting bolt | 55 | 5.6 | 40.5 |
| Front stabilizer mount bracket bolt | 33 | 3.4 | 24.5 |
| Front stabilizer bar joint nut | 55 | 5.5 | 40.0 |
NOTE:
The specified tightening torque is described in the following.
FRONT STRUT ASSEMBLY COMPONENTS
SUSPENSION ARM COMPONENTS
FRONT SUSPENSION FRAME COMPONENTS
FRONT STABILIZER BAR COMPONENTS
FRONT STRUT ASSEMBLY COMPONENTS
SUSPENSION ARM COMPONENTS
FRONT SUSPENSION FRAME COMPONENTS
FRONT STABILIZER BAR COMPONENTS
Reference:
For the tightening torque of fastener not specified in this section, refer to FASTENERS INFORMATION .