Sub Fuel Level Sensor Removal and Installation (4WD Model): Installation

WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.

Reference: FUEL LEVEL SENSOR INSPECTION

Reverse removal procedure, noting the following points.

Check that mating surface of sub fuel level sensor is clean.
Replace gasket with new one.
Tighten sub fuel level sensor screws to specified torque.
Tightening torque

Sub fuel level sensor screw: 1.6 N.m (0.16 kg-m, 1.5 lbf-ft) ((Reference))
After tightening screws, check for fuel leaks.