Fuel Pump Assembly Removal and Installation: Installation

WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.

Reference: FUEL PUMP INSPECTION

Reverse removal procedure, noting the following points.

Check that mating surface of fuel pump is clean.
Use new fuel pump gasket (1).

Fig 1: Identifying Fuel Pump Gasket
Courtesy of SUZUKI OF AMERICA CORP.
Align protrusions (1) on fuel pump with aligning hole (2) on fuel pump plate.
Align straight portion (3) on fuel pump plate with specified position on fuel tank.

Fig 2: Identifying Protrusions On Fuel Pump With Aligning Hole
Courtesy of SUZUKI OF AMERICA CORP.
Tighten fuel pump nuts to specified torque.
Tightening torque

Fuel pump nut: 10 N.m (1.0 kg-m, 7.5 lbf-ft)