Fuel Pipe Removal and Installation: Removal
WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.
- Relieve fuel pressure in fuel feed line, see Fuel Pressure Relief Procedure .
- Remove battery, battery tray and battery bracket, see BATTERY REMOVAL AND INSTALLATION .
- Remove left side main floor undercover.
- Remove fuel pipe stopper (1) and disconnect quick joint (3) of fuel feed pipe, see FUEL HOSE DISCONNECTING AND RECONNECTING .
- Mark location of clamps (4) on fuel feed pipe (body side) (2), so that clamps can be reinstalled to where they were.
- Remove clamps (4) from vehicle body, fuel feed pipe (body side) (2) and brake pipes.CAUTION: Be careful not to bend and damage fuel feed pipe and brake pipes when removing clamp.
- Remove fuel feed pipe (body side) (2).