LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> Kizashi Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Engine Cooling System) >> Repair Instructions >> Coolant Level Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Coolant Level Check

WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: To avoid getting burned, do not remove radiator cap while engine and radiator are still hot.
Scalding fluid and steam can gush out under pressure if cap is taken off too soon.

When engine is cool, check coolant level in reservoir (1).

Normal coolant level should be between FULL mark (2) and LOW mark (3) on reservoir (1).

If coolant level is below LOW mark (3), remove reservoir cap (4) and add proper coolant to reservoir to bring coolant level up to FULL mark (2).

It is not necessary to remove radiator cap to check coolant level.

Fig 1: Identifying Coolant Level Between FULL Mark And LOW Mark On Reservoir
G06528226Courtesy of SUZUKI OF AMERICA CORP.