Tightening Torque Specifications
WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS
| Fastening part | Tightening torque | Note | ||
|---|---|---|---|---|
| N.m | kgf-m | lbf-ft | ||
| SDM bolt | 9 | 0.9 | 6.5 | |
| Driver air bag (inflator) module mounting bolt | 9 | 0.9 | 6.5 | |
| Passenger air bag (inflator) module bolt | 23 | 2.3 | 17.0 | |
| Front side air bag (inflator) module mounting nut | 23 | 2.3 | 17.0 | |
| Rear side air bag (inflator) module bolt | 10 | 1.0 | 7.4 | |
| Curtain air bag (inflator) module bolts | 11 | 1.1 | 8.0 | |
| Forward impact-sensor bolt | 9 | 0.9 | 6.5 | |
| Rear side air bag bolt | 9 | 0.9 | 6.5 | |
| Front side air bag (inflator) module nut | 23 | 2.3 | 17.0 | |
| Rear side air bag (inflator) module mounting bolt | 10 | 1.0 | 7.4 | |
NOTE:
The specified tightening torque is described in the following.
FRONT SIDE AIR BAG (INFLATOR) MODULE COMPONENTS
REAR SIDE AIR BAG (INFLATOR) MODULE COMPONENTS
CURTAIN AIR BAG (INFLATOR) MODULE COMPONENTS
FRONT SIDE AIR BAG (INFLATOR) MODULE COMPONENTS
REAR SIDE AIR BAG (INFLATOR) MODULE COMPONENTS
CURTAIN AIR BAG (INFLATOR) MODULE COMPONENTS
Reference:
For the tightening torque of fastener not specified in this section, refer to FASTENERS INFORMATION .