SDM Removal and Installation: Installation
WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.
Reverse removal procedure, noting the following points.
- Check that none of the following faulty conditions exists.
- Bend, scratch, deformity on mating surface of vehicle body where SDM is mounted.
- Foreign matter or rust on mating surface of vehicle body where SDM is mounted.
- Ensure that arrow (3) on SDM is pointing toward front of vehicle.
- Tighten SDM bolt (2) to specified torque.
Tightening torque
SDM bolt (a): 9 N.m (0.9 kg-m, 6.5 lbf-ft)
- Enable air bag system.