Rear Side Air Bag (Inflator) Module Removal and Installation: Installation

WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.

Reverse removal procedure, noting the following points.

Lock connector for air bag (inflator) module securely.
Close cap.
Tighten rear side air bag (inflator) module bolts to specified torque.
Tightening torque

Rear side air bag (inflator) module bolt (a): 10 N.m (1.0 kg-m, 7.4 lbf-ft)

Fig 1: Identifying Rear Side Air Bag (Inflator) Module Bolt
Enable air bag system.