Enabling Air Bag System
WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.
- Make sure that removed components are installed and/or disconnected connectors are connected properly.
- Check that ignition mode is "OFF".
- Connect negative (-) cable at battery and/or install "A/B" fuse to junction block.
- Push engine switch to change ignition mode to "ON".
- Check if "AIR BAG" warning light flashes for about 6 seconds and then comes off.
- Perform AIR BAG SYSTEM CONSTRUCTION if defective.