Curtain Air Bag (Inflator) Module Removal and Installation: Removal
WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.
- Disable air bag system.
- Remove front pillar trim, center pillar upper trim/lower trim and rear pillar inner trim.
- Remove roof lining.
- Disconnect curtain air bag (inflator) module connector (3) as show in figure.
- Release lock (2).
- Disconnect connector with lock released.
- Remove curtain air bag (inflator) module bolt and remove curtain air bag (inflator) module.