LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> Kizashi Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 57 (Air Bag System) >> Diagnostic Information and Procedures >> DTC B1013: SDM Internal Failure >> DTC Troubleshooting
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Troubleshooting

WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.
DTC TROUBLESHOOTING CHART

Step Action YES NO
1  Was "Air Bag Diagnostic System Check" performed?  Go to Step 2. Go to AIR BAG DIAGNOSTIC SYSTEM CHECK .
2  DTC check 
  1. Clear DTC.
  2. Confirm that ignition mode of keyless push start system is in "OFF".
  3. Push engine switch to change ignition mode of keyless push start system to "ON".
  4. Check DTC.

Is DTC B1013 still indicated? 		 Substitute a known-good SDM and recheck DTC. Check intermittent trouble.
NOTE: Upon completion of inspection and repair work, perform the following items.
  • Reconnect all air bag system components and ensure all components are properly mounted.
  • Clear DTCs, referring to DTC CLEARANCE  if any DTC is detected.
  • Repeat AIR BAG DIAGNOSTIC SYSTEM CHECK  to confirm that the trouble has been solved.
scientia non olet · About LEMON Manuals