ABS Warning Light

WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.

Push engine switch to change ignition mode of keyless push start system to "ON".
Check that ABS warning light (1) comes ON for about 2 seconds and then goes OFF. If ABS warning light never light up, go to ABS WARNING LIGHT DOES NOT COME ON AFTER PRESSING ENGINE SWITCH TO CHANGE THE IGNITION MODE OF KEYLESS PUSH START SYSTEM TO "ON" . If ABS warning light remains ON and no DTC is stored in ABS control module, go to ABS WARNING LIGHT COMES ON STEADY .

Fig 1: Identifying ABS Warning Light
Courtesy of SUZUKI OF AMERICA CORP.