LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> Kizashi Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 56 (Electronic Stability Program) >> Diagnostics Information and Procedures >> ABS Warning Light Does Not Come ON after Pressing Engine Switch to Change the Ignition Mode of Keyless Push Start System to "ON" >> Circuit Description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit Description

WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.

Operation (ON/OFF) of ABS warning light is controlled by ESP® control module through light driver module in combination meter.

If antilock brake system is in good condition, ESP® control module turns ON ABS warning light when engine switch is pressed to change ignition mode to "ON", keeps it "ON" for 2 seconds and then turns it OFF. If any abnormality in the system is detected, ABS warning light is turned ON continuously by ESP® control module. Also, it is turned ON continuously by light driver module when the connector of ESP® control module is disconnected.

scientia non olet · About LEMON Manuals