LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> Kizashi Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (Engine Electrical Devices) >> Repair Instructions >> Knock Sensor Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Knock Sensor Removal and Installation: Removal

WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative (-) cable at battery.
  2. Remove generator, see GENERATOR REMOVAL AND INSTALLATION .
  3. Disconnect knock sensor connector.
  4. Remove knock sensor (1) from cylinder block.
scientia non olet · About LEMON Manuals