DTC Table
WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
During engine running, DTC is detected by pushing cruise control switch (MAIN (ON/OFF), CANCEL, RES/ACC, or SET/COAST) for more than specified time.
DTC DETECTING CONDITION CHART
| DTC | DTC name | DTC detecting condition |
|---|---|---|
| P0504 | Brake Switch "A"/"B" Correlation | Refer to DTC TABLE . |
| P0575 | Cruise Control Input Circuit | Cruise control switch signal voltage remains at low level for specified time continuously. |
| P0649 | Speed Control Lamp Control Circuit | "CRUISE/SET indicator light lighting signal" from combination meter remains unchanged even if ECM transmits request to turn on or turn off "CRUISE/SET indicator light control signal" to combination meter through CAN communication. |