DTC Confirmation Procedure
WARNING:
If you do not select a suitable route and take proper precautions when performing a road test, an accident can occur.
- Select a level road with no traffic to minimize the risk of accident.
- Perform the test extremely carefully.
- Perform the road test using 2 persons, a driver and an assistant.
NOTE:
Confirm that the following conditions are met in this "DTC Confirmation Procedure".
- Battery voltage > = 11 V
- Connect scan tool with ignition mode of keyless push start system in "OFF".
- Warm up engine to normal operating temperature.
- Drive vehicle for 5 sec. at throttle opening 30% or more checking the opening with scan tool.