HomeLink® Inspection (If Equipped)
- Check if indicator (LED) (2) lights in green when engine switch is pressed to change ignition mode of keyless push start system in "ON".
Check power supply and ground circuit of rear view mirror if LED does not light in green.
- Press 3 buttons (1) one by one and check if LED flashes in red.
Replace rear view mirror if LED does not flash in red.
- Connect power supply of HomeLink® tester (1) (made by KENT-MOORE) to accessory socket.
- Referring to the registration method of the customer transmitter code in owner's manual, register the code of the test transmitter in the HomeLink® tester.
If transmitter code cannot be registered, replace rear view mirror.
- Press HomeLink® button after registering code of test transmitter. Make sure that the LED (2) of the HomeLink® tester lights up.
If LED does not light up, replace rear view mirror.