LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> Kizashi Base, Automatic CVT Trans >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake Control System >> Repair Instructions >> Brake Pedal Assembly Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Brake Pedal Assembly Removal and Installation: Removal

  1. Remove steering column, see STEERING COLUMN REMOVAL AND INSTALLATION .
  2. Remove instrument panel, see INSTRUMENT PANEL REMOVAL AND INSTALLATION .
  3. Disconnect brake light switch connector.
  4. Remove battery.
  5. For M/T model, disconnect clutch master cylinder, see CLUTCH MASTER CYLINDER REMOVAL AND INSTALLATION .
  6. For CVT model, remove brake pedal bracket nut (1) located in engine compartment.
    Fig 1: Identifying Brake Pedal Bracket Nut
    G06528673Courtesy of SUZUKI OF AMERICA CORP.
  7. Remove clip (2) and clevis pin (3) from cylinder push rod clevis (1).
    Fig 2: Identifying Clevis Pin And Cylinder Push Rod Clevis With Clip
    G06528674Courtesy of SUZUKI OF AMERICA CORP.
  8. Remove brake pedal bracket bolts (1) and brake booster nuts (2).
    Fig 3: Identifying Brake Pedal Bracket Bolts And Brake Booster Nuts
    G06528675Courtesy of SUZUKI OF AMERICA CORP.
  9. Remove brake booster from dash panel, see BRAKE BOOSTER REMOVAL AND INSTALLATION .
  10. Remove accelerator pedal bracket, see ACCELERATOR PEDAL ASSEMBLY (INCORPORATING APP SENSOR) REMOVAL AND INSTALLATION .
  11. Remove brake pedal and clutch pedal assembly or brake pedal assembly.

    M/T model: Brake pedal and clutch pedal assembly

    CVT model: Brake pedal assembly

scientia non olet · About LEMON Manuals