LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> Kizashi Base, Automatic CVT Trans >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake Control System >> Repair Instructions >> Brake Master Cylinder Assembly Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Brake Master Cylinder Assembly Removal and Installation: Removal

  1. Clean external area of brake master cylinder assembly.
  2. Depress brake pedal several times to release vacuum in brake booster.
  3. Disconnect fluid level switch connector (1) from reservoir.
  4. Remove battery.
    Fig 1: Identifying Fluid Level Switch Connector
    G06528693Courtesy of SUZUKI OF AMERICA CORP.
  5. Remove brake fluid in reservoir, see BRAKE FLUID REPLACEMENT .
  6. Using special tool, loosen flare nuts and disconnect brake pipes (1) from brake master cylinder.

    Special Tool 

    : 09950-78220 

    Fig 2: Identifying Brake Pipes
    G06528694Courtesy of SUZUKI OF AMERICA CORP.
  7. Remove brake master cylinder fixing nuts (1).
    Fig 3: Identifying Brake Master Cylinder Fixing Nuts
    G06528695Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals