Sun Roof Motor Initialization: Notes
NOTE:
If an object is trapped during the sun roof motor initialization, the initialization is failed and the anti-pinching function is disabled. Do not pinch any object during the sun roof motor initialization.
- With ignition mode of keyless push start system in "ON", press "TILT UP"-side of sun roof switch to fully tilt up sun roof glass.
- Keep pressing "TILT UP"-side of sun roof switch for 2 or more seconds. Sun roof glass will tilt down a little and initialization of sun roof motor is completed.
- Conduct auto tilt down/up and auto slide open/close to check that auto functions work normally. (Repeat from Step 1) if any auto function is faulty.)
- Conduct anti-pinching function check.