LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> Kizashi Base, Automatic CVT Trans >> Repair and Diagnosis >> Body & Frame >> Seats >> Repair Instructions >> Seat Position Memory Initialization (If Equipped)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Seat Position Memory Initialization (If Equipped)

NOTE:
  • Initialization is not completed if power supply of power seat control module is interrupted during initialization.

    Repeat the same procedure from the beginning if power is interrupted during initialization.

  • Buzzer sounds twice when initialization of all motors is completed.
  1. Operate each motor, one at a time, to move seat to position indicated in the following table and hold seat at each position for at least 5 seconds.
    MOTOR POSITION CHART

    Motor Position
    Slide motor Rear end
    Reclining motor Front end
    Lifter motor Bottom end
    Tilt motor Bottom end
scientia non olet · About LEMON Manuals