4WD Control Module
SCAN TOOL DATA REFERENCE CHART
| Scan tool data | Normal condition/Reference values | Vehicle condition |
|---|---|---|
| Accel Position | 0 - 2% | Accelerator pedal released |
| 90 - 100% | Accelerator pedal depressed fully | |
| AWD Mode Status | AWD | 2WD/i-AWD switch selected i-AWD position |
| 2WD | 2WD/i-AWD switch selected 2WD position | |
| Transfer Oil Temperature | -40 - 215°C (-40 - 419°F) | Engine running |
| 4WD Control Drive CUR. | 0 - 200 mA | Engine running |
| Battery Voltage | 10 - 14 V | At engine idle speed |
| 4WD Unit Temperature | -40 - 215°C (-40 - 419°F) | Engine running |
| Front Wheel Speed | Same value as speedometer reading | When there is no slippage in the wheel while going straight |
| Rear Wheel Speed | Same value as speedometer reading | When there is no slippage in the wheel while going straight |
| F-R Wheelspeed Difference | 0 rpm | Vehicle stopped |
| 4WD Control Duty Ratio | 0% | Ignition ON |