Back Up Light Switch Removal and Installation: Installation

Reference: BACK UP LIGHT SWITCH INSPECTION 

Reverse removal procedure for installation noting the following.

• Apply oil to new O-ring (1) and then install back up light switch (2) to transmission rear case.

  Tightening torque 

  Back up light switch (a): 23 N.m (2.3 kgf-m, 17.0 lbf-ft) 

  Fig 1: Back Up Light Switch And O-Ring With Torque Specifications

  Courtesy of SUZUKI OF AMERICA CORP.
• Check back up light for proper function with ignition switch turned ON and reverse position.