LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> Grand Vitara Base >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Rear Suspension >> Repair Instructions >> Trailing Rod/Bushing Disassembly and Reassembly >> Disassembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Trailing Rod/Bushing Disassembly and Reassembly: Disassembly

  1. Push out trailing rod bushing by using hydraulic press (1) and special tool.
    NOTE: Remove bushing following the direction shown in figure since diameter "b" is bigger than diameter "a".

    Special Tool 

    (A): 09945-56510 

    Fig 1: Pushing Out Trailing Rod Bushing Using Hydraulic Press And Special Tool
    G08893953Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals