LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> Grand Vitara Base >> Repair and Diagnosis >> Maintenance >> Procedures >> Maintenance And Lubrication >> Repair Instructions >> Brake Fluid Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Brake Fluid Inspection

  1. Check around master cylinder and reservoir for fluid leakage.

    If found leaky, correct.

  2. Check fluid level. If fluid level is lower than the minimum level of reservoir, refilling is necessary. Fill reservoir with specified brake fluid indicated on reservoir cap. For the details, refer to BRAKE FLUID LEVEL CHECK .
    NOTE: The brake system of this vehicle is factory-filled with brake fluid of the type indicated on the reservoir tank cap. If any other type of fluid is used in place of or mixed in with the original fluid, the brake system components will be seriously damaged.
    Do not use brake fluid that is different from that indicated on the reservoir cap. In addition, never use old or used brake fluid, or fluid from an unsealed container.

    Brake fluid 

    Refer to reservoir cap of brake master cylinder  .

    Fig 1: Identifying Brake Fluid Level
    G08895184Courtesy of SUZUKI OF AMERICA CORP.